The Eagle was grounded: Gurney's Mk1 successor that never raced

Dan Gurney intended to follow up his F1 Eagle success, but the 1969 car was stillborn. It's never been seen, until now

Dan Gurney in Eagle at 1967 F1 Belgian Grand Prix

Eagle-Weslake MkII took a landmark victory at Spa in '67

Bernard Cahier/Getty Images

Dan Gurney’s 1967 Belgian Grand Prix-winning Eagle-Weslake is widely regarded as one of the most beautiful grand prix cars ever constructed. From the tip of its shapely Eagle beak, through its compact Gurney-Weslake V12 heart, to its exquisite titanium exhaust header tail feathers it was a work of mechanical art. Designed by Len Terry, the All American Racers — or Anglo American Racers, if you will — Eagle Mark 1 made its competition debut in the rain at the old Spa-Francorchamps circuit in June 1966, resplendent in its national livery of dark blue with a single white stripe.

For that inaugural outing in Belgium and the next four races that season, Gurney’s car was powered by the venerable 2.7-litre Coventry-Climax FPF four-cylinder engine while awaiting completion of the 3.0-litre Gurney-Weslake V12 for which it had been designed. A year later, with the V12 in place, Gurney’s Eagle carried him to the top step of the podium at Spa on the anniversary of its debut — and only the fourth race in its definitive V12-powered configuration.

That Spa success remains the only grand prix victory ever scored by a car built in the United States. It also allowed Gurney to stand alongside Jack Brabham and, later, Bruce McLaren as the only men ever to win a GP in their own car.

Because that particular Formula 1 Eagle, chassis 104, uniquely and extensively employed the lightweight metals titanium and magnesium, it was known as the Ti-Mag car. An earlier aluminium Eagle, chassis 102, had won the non-points Daily Mail Race of Champions at Brands Hatch that spring, but those would turn out to be AAR’s only F1 wins.

In September 1968, his Formula 1 budget cut off, Gurney reluctantly abandoned his quest and returned home to concentrate on the American National Championship where his cars would enjoy considerable success in the decades ahead. By then, constant progress in vehicular dynamics had dated Terry’s original design, and the grand prix Eagle’s once svelte shape had begun to sprout supplemental aerodynamic appendages as a means to keep pace.

Sitting back home in California on a fabrication bench at the AAR factory, however, was the basis of what would have been its replacement. Designed by Tony Southgate, who had taken over the chief designer’s chair from Terry back in 1967, the new car’s design objectives included a more reclined driving position and suspension geometry that minimised camber change from bump to droop while providing zero bump-steer.

1969 Gurney Eagle buck

Wooden buck shows form of proposed 1969 car

John Zimmermann

1969 Eagle Surney nose

Half-built chassis shows chisel nose

John Zimmermann

“The new F1 car was well advanced when it was terminated due to lack of the correct budget,” remembers Southgate. “The magnesium-panelled chassis was not quite complete. It was a double-curvature monocoque with a distinct onion-shaped cross section, for a low centre of gravity, with the fuel concentrated in the middle. The water radiator was in the nose and the nose was very flat. Everything was either magnesium or titanium. The engine was going to be the latest Gurney-Weslake V12. This was because the chassis was not engineered to take the fully stressed Cosworth DFV.”

Related article

A beautiful win at beautiful Spa
Opinion
F1

A beautiful win at beautiful Spa

Paul Fearnley speaks to Jo Ramírez, recalling an All-American win 50 years ago Has there been a more aesthetic Grand Prix victory than handsome Dan Gurney’s at Spa 50 years…

By Paul Fearnley

Gurney had, however, long been wary of magnesium monocoque chassis, having referred to the risks he took while driving 104 by likening it to a Ronson cigarette lighter. This trepidation was not eased by the tragic fiery crash that claimed the life of Jo Schlesser at the 1968 French Grand Prix. Most of the chassis for the unfortunate Frenchman’s Honda had been crafted of that incendiary metal, and the accident only intensified Gurney’s already close scrutiny of his own project.

“It looked like the magnesium we were using was even grainier than we had worked with on 104,” he explains, “and it didn’t look as safe to me. It almost looked like, if you had the courage, you could take and stick your finger right through it. So I decided… count me out.”

Shortly after the project was cancelled, Southgate decided to leave AAR to pursue other opportunities in Formula 1. He landed at BRM, where he drew the P153 [see Motor Sport, October 2006] with a monocoque that was conceptually similar to the stillborn Eagle’s. Ironically, the V12 that powered that BRM was drawn up by Aubrey Woods, the same man who had designed the Eagle’s Weslake V12.

Whether the Mark 6 would have been competitive in Formula 1, and whether Gurney could have returned to the winners circle with it, will forever remain unknown. Visions of further F1 Eagles would dance through Gurney’s head on several subsequent occasions, but none of them ever reached hard form. That he and AAR had done it once would have to be enough.